Basestation setup:
- Remove basestation case from the main transport case. Install the basestation on the provided tripod via the screw thread on the case bottom or set the basestation on a table. Set up the tripod so that it is stable and the basestation case is at comfortable height.
- Open the basestation case. Flip up the two large antennas so they are above the upper edge of the case lid. Aim the antennas so they will point towards the desired flight area.
- Power on the basestation via the switch on the battery pack.
- Power on the tablet.
- The Ethernet to USB adapter connected to the tablet does not work upon booting with some tablets. It is recommended to unplug the USB side of the adapter and reinsert after the tablet boots. If you do boot with the adapter plugged in, simply replugging it will resolve the problem, the tablet does not need to be rebooted.